PDA

View Full Version : Aem uego & Mapclamp



PatNy
01-09-06, 01:26 PM
I have recently purchased both these items and waiting to install them untill i get a downpipe to put the wideband bung into...My question is what type of gains will i get with these 3 upgrades...I would like to raise boost but cant afford a return line kit yet...$330 deep for my pockets....Wondering if i should regap my stock spark plugs...I have read on the 300whp on the stock turbo treads that regaping the spark plugs is a must....So anyinput on the gains and any lilthings i could do the help gain more from the mods let me know...!!

DAROOKE
01-09-06, 05:10 PM
What other mods do you have besides the mapclamp and uego? What downpipe and exhaust do you have and or ordering? If you get the Borla and Maxfab exhaust/downpipe set up I gained approx. 20HP just from that.

PatNy
01-09-06, 06:00 PM
Mods Are gonna be: STG 1 AGP WGA AEM uego map clamp and 3" catless Down pipe (maxx fab) will be getting the 3" catback after march!

SupeRfasT-4
01-09-06, 09:45 PM
I already have a map clamp and was thinking about buying the AEM UEGO, not too expensive and does the job, and i can put in right in my daul gauge pod. Im pretty sure you can hit real close to 300 with a good tune without a fuel return line.

DAROOKE
01-09-06, 10:23 PM
I think you will be around 270Hp 280TQ. Possibly run 13.5 with good driving and no boost leaks. A return line will get you to 300hp.

PatNy
01-09-06, 10:33 PM
sounds good to me...do i need the return line to up the boost to 20 spike? 16 hold?...Can u regap sparkplugs?