PDA

View Full Version : g-Force T/A Drag Radial


JorgeSRT-4
12-26-08, 03:41 AM
will a g-Force T/A Drag Radial fit on stock srt-4 wheels?:confused:
Munky
12-26-08, 09:07 AM
If you buy it in the correct size...sure. Was this a trick question?!?
Evolution IX
12-26-08, 09:03 PM
If you buy it in the correct size...sure. Was this a trick question?!?


HAHAHAHAHAHAHAHA
MysterySkittle
12-26-08, 11:09 PM
yes, i think they are on backorder or discontinued or something like that...i could completely wrong though
slvrsrt4nj
03-20-09, 02:00 AM
didnt feel like making a new thread and i didnt see this discussed anywhere. i have 225/45/17 bfg dr's. last time i used them i revved alittle to high at the line and snapped the driver axle clean in 2 :mad: . my friend told me this is how you burnout with dr's. tire pressure around 26? up to the water box almost at the end but still in water. pull up the ebrake, 2nd gear rev it up and let it go burnout until the tires get hot n sticky and some smoke. once you feel the car wana pull forward drop the ebrake and floor it outta the burnout box. at the line find a good rpm to launch at and go. now my problem is what psi the tires should be at and what rpm to launch at so i hook but dont snap an axle? and is my friends method correct? thanks
marshall1990
03-20-09, 03:32 AM
yo lower the psi to 20 and youll be fine
slvrsrt4nj
03-20-09, 03:41 AM
:confused: that seems too low
marshall1990
03-20-09, 03:48 AM
thats what mine is at in the wetbox and i get the best traction for some reason
SRT4Trb0
03-20-09, 07:39 AM
thats what mine is at in the wetbox and i get the best traction for some reason
you have dr's?

paul i think i ran mine a little on the low side (low 20's) and i launched at 3500 kind of feathering the clutch. you'll get it..you just need some seat time with them
marshall1990
03-20-09, 08:15 AM
yea y
CaRaZyGuY
03-20-09, 06:24 PM
Way back in the day when I was a NOOB and just on S1, fm wga, exhaust and a couple tiny things here and there I used BFG drs and I did a normal burnout because you have to at ATCO.... then i just brought it up to 1900 and slipped out easy and i think i got like a 1.9 60fts all day if i remember right.

Here's the vid of me going easy outta the gates (no flaming how gay those tailights looked they were a vday gift from the ex lol)

http://videos.streetfire.net/video/CaRaZyGuYs-SRT4-vs-C5-127_44802.htm
Munky
03-20-09, 08:47 PM
No wonder she's an ex...I woulda socked her in the gut for buying me those.








































:fryparanoid:
CaRaZyGuY
03-20-09, 08:56 PM
No wonder she's an ex...I woulda socked her in the gut for buying me those.


































:fryparanoid:


LOL can't sock her in the gut now she's definitely preggo... not a good idea. AND NO it's not mine that was one from YEAAAAAAAAARS ago. Wings FTL btw.
Munky
03-20-09, 08:57 PM
Who says you can't sock her in the gut now??!?

































:fryparanoid:
slvrsrt4nj
03-21-09, 02:34 AM
you have dr's?
paul i think i ran mine a little on the low side (low 20's) and i launched at 3500 kind of feathering the clutch. you'll get it..you just need some seat time with them

yea long time ago i bought racing hart evolutions in silver from joe boostn with 225/45/17 bfg dr's. i RARELY use them. esp after snapping the axle i was like f*ck this... i want slicks lol but i put them on the other day and been driving around town with them.. NO wheel spin :woot: just hooks like hell lol but im afraid to use em at the track and wanted peoples experiences and advice before i try them again. i was running em with like 26psi in em and was launching em at like 3000 but they chattered like hell. so i went down some rpms and then last run i staged and waited for the other guy n he staged real fast and the lights just dropped so i revved it up and dropped it and SNAP. completely my fault but i was pissed to say the least after that. ill prob. give em a shot again soon. ill try like 20 25 psi and launch em low like 1900 2000 and then try alittle higher. thanks for the help guys:D
SRT4Trb0
03-21-09, 07:53 AM
yea long time ago i bought racing hart evolutions in silver from joe boostn with 225/45/17 bfg dr's. i RARELY use them. esp after snapping the axle i was like f*ck this... i want slicks lol but i put them on the other day and been driving around town with them.. NO wheel spin :woot: just hooks like hell lol but im afraid to use em at the track and wanted peoples experiences and advice before i try them again. i was running em with like 26psi in em and was launching em at like 3000 but they chattered like hell. so i went down some rpms and then last run i staged and waited for the other guy n he staged real fast and the lights just dropped so i revved it up and dropped it and SNAP. completely my fault but i was pissed to say the least after that. ill prob. give em a shot again soon. ill try like 20 25 psi and launch em low like 1900 2000 and then try alittle higher. thanks for the help guys:D
i was talking to marshall when i said that :lol:... i know you bought those..i was there and those used to be mine haha.
SRT4Trb0
03-21-09, 07:55 AM
i still think you'd be better off launching at a higher rpm (3 grand or higher) and feathering the clutch out.
slvrsrt4nj
03-21-09, 10:44 PM
ehh idk high rpm prob. isnt a good idea lol i mean id rather spin then bog but im still afraid to snap another axle :BangHead:
H.T. SRT
03-21-09, 10:46 PM
i still think you'd be better off launching at a higher rpm (3 grand or higher) and feathering the clutch out.

Thats what i launch at on Stock BFG's. 3K rpm feathering the clutch out.
SRT4Trb0
03-21-09, 11:05 PM
ehh idk high rpm prob. isnt a good idea lol i mean id rather spin then bog but im still afraid to snap another axle :BangHead:
stop being such a :sota: and just do it! if you're afraid you're gonna break something, you shouldn't be in racing!

Thats what i launch at on Stock BFG's. 3K rpm feathering the clutch out.
:werd: but on the drag radials, he should be able to let the clutch out quicker.
slvrsrt4nj
03-21-09, 11:13 PM
well my problem is i dont slip the clutch which i guess ill have to try or learn to do. i just let it out lol either slow or usually fast haha ill try it. if i break another axle dont be surprised to have a broken window and find an srt4 axle in 2 pieces in ur evslow :paranoid: i keed i keed
SRT4Trb0
03-22-09, 08:14 AM
the last thing you are going to do while feathering your clutch is break another axle. if anything you're clutch wouldn't like you very much depending on how slowly, and what rpm you release it.
slvrsrt4nj
03-22-09, 06:14 PM
yea thats my other problem i dont wana murder my stock clutch lol but o well if it goes it goes. gonna eventually need to get a stronger clutch anyways :rolleyes:
SRT4Trb0
03-22-09, 10:35 PM
your clutch should be fine...you're not making crazy power. i had stock clutch on my 50 trim, and didn't slip when i drove it. only for joe and anthony :lol:
Grifter
03-22-09, 10:38 PM
I never slipped my clutch.
SRT4sum
03-23-09, 05:27 AM
Who says you can't sock her in the gut now??!?


































:fryparanoid:


Its cheaper then paying for an abortion and not as messy as using a hanger.