PDA

View Full Version : question


hondaeater
10-29-07, 04:49 PM
you dont need a map clamp if your running a stage pcm, correct?
srtrican
10-29-07, 04:52 PM
You still need it, it keeps you from pulling timing when running at high boost. I would go with a piggyback instead tho.
NYYDYNASTY
10-29-07, 05:00 PM
you dont need a map clamp if your running a stage pcm, correct?

You still need it, it keeps you from pulling timing when running at high boost. I would go with a piggyback instead tho.
no you dont
oo3menace
10-29-07, 05:03 PM
A map clamp is a cheap alternative to a fuel management unit (such as Greddy emanag or AEM EMS). It has nothing to do with which PCM you're running, staged, stock, or otherwise.
hondaeater
10-29-07, 05:30 PM
ok sweet, bc i just got rc 750's boomba fuel rail walbro pump, dtec fc, stage one, hahn 20g turbo kit, aem wideband, aem boost, aem oil pressure, greddy profec 2 ebc. am i missing anything? the only things i got on it so far are the boomba rail and the profec bc im having a hard time tunin the ebc, is it bc of of the stock wga?
psi chick
10-29-07, 05:31 PM
no one ever needs a map clamp
SuperMario
10-29-07, 06:28 PM
ok sweet, bc i just got rc 750's boomba fuel rail walbro pump, dtec fc, stage one, hahn 20g turbo kit, aem wideband, aem boost, aem oil pressure, greddy profec 2 ebc. am i missing anything? the only things i got on it so far are the boomba rail and the profec bc im having a hard time tunin the ebc, is it bc of of the stock wga?

If you purchased a Dtec FC, then your not going to need a mapclamp.
srtrican
10-29-07, 07:20 PM
ok sweet, bc i just got rc 750's boomba fuel rail walbro pump, dtec fc, stage one, hahn 20g turbo kit, aem wideband, aem boost, aem oil pressure, greddy profec 2 ebc. am i missing anything? the only things i got on it so far are the boomba rail and the profec bc im having a hard time tunin the ebc, is it bc of of the stock wga?

I woould get an AGP Fuel return line kit and AGP wastegate. oh and a 3" Turboback exhaust.
hondaeater
10-29-07, 09:49 PM
im not putting on the dtec, injectors pump and all of that stuff until i get the hahn 20g, which should be here in a couple of weeks modernperformance said it takes like 5 weeks to ship so im just waiting on that and i have the mpx 3in but i dont have the return line