PDA

View Full Version : question about an actuator



mikegtdyno
09-13-05, 12:10 PM
it says on slowboyracing.com, "If you are looking for a Dyno proven 40-50 WHP over your stock actuator, please take a closer look at what SBR has brought to you" this doesnt mean that the aftermarket acutator is given u 40 whp right? how much do u think ill get out of a sbr actutator ?

myfault
09-13-05, 12:15 PM
wastegate actuator

lets you boost more and hold more psi till redline

yes raising the boost can give gains from 30-40 whp, but you have to do it safely.

Broken5hift
09-13-05, 01:09 PM
it works in conjunction with your other mods, erog, the less mods you have the less the actuator will end up doing *safely*

mikegtdyno
09-13-05, 02:25 PM
so basically if i wanted to i could change the amount of psi if i use an actuator, u get to set your own boost?

myfault
09-13-05, 02:29 PM
so basically if i wanted to i could change the amount of psi if i use an actuator, u get to set your own boost?
yes
you can adjust the boost by tightening/loosing the nut on the wga (wastegate actuator) or you can use a boost controller along with the wga and set the wga at a constant and use the bc to control the boost

mikegtdyno
09-13-05, 02:31 PM
so if i put it on and tell the mechanic to set it 5psi over stock he could do that ?

how much horsees youll think ill ge out of that

and how do u know when the boost is too much (hazard)

myfault
09-13-05, 02:33 PM
so if i put it on and tell the mechanic to set it 5psi over stock he could do that ?

how much horsees youll think ill ge out of that

and how do u know when the boost is too much (hazard)
its easy to put on yourself...
and you just have to adjust it then drive your car and see what it boosts.
then adjust accordingly to get what you want. most people set the wga to about 15-16 psi then use a boost controller to up the boost after that. if you have an ebc (electronic boost controller - i recommend the greddy profec b spec 2) then you can adjust the boost from inside your car while you drive.

mikegtdyno
09-13-05, 02:35 PM
ooo arite i c, thanks yo

mikegtdyno
09-13-05, 02:40 PM
would u know wut websitr i could find the greddy profec b spec 2

myfault
09-13-05, 02:40 PM
no prob

myfault
09-13-05, 02:41 PM
would u know wut websitr i could find the greddy profec b spec 2
www.modernperformance.com

kgmdawg84
09-13-05, 03:02 PM
lol...

www.ebaymotors.com

cheapest prices for the profec-b ive seen

DaRkILLa
09-13-05, 04:19 PM
yea they cheap but u gatta make sure they are new

Broken5hift
09-13-05, 04:29 PM
i second modernperformance.com

Broken5hift
09-13-05, 04:31 PM
btw the wga (actuator) will hold boost over stock but its mainly for holding your boost at redline (as it drops) and like myfault said the BC is for upping the boost until redline. or you could be like me and just set the wga to 18 and leave the MBC closed.

kgmdawg84
09-13-05, 05:08 PM
yea they cheap but u gatta make sure they are new

indeed but theres a place located in PA that sells all that shit for cheap on ebaymotors and we all have ordered from him and its QUALITY stuff... ill get the name of the guy and its def someone you should look into buying from

cokey
09-14-05, 09:27 PM
i think ken's talking bout the same place i got my RS bov from.