UPR goes low 12's on pump and 23psi

[joker_08723]

well i went to atco today and ran the car on slicks for the first time and i must say the jokermobile really moves. my 60f was 1.822 and i ran a 12.192 at 116.09, i think with time and race gas i will go even further into the 11's and hopefully not miss a gear like i did that pass. Lots of props to ed and bill for getting me set up and to rich and mike for lettin me use the slicks. over all i had a blast today and i am looking forward to making my times better, thanks again bro's...:yay:

[N2MB]

nice job dude,this is on the new motor?

[joker_08723]

nope the same, i will be doing the motor by the end of summer. i'm saving up for it so i don't have to wait that long for it to be built..

[CaRaZyGuY]

Good job man, work on the 60 ft a tad and you'll be set. How many times did you get to run? How did Bill's Evo run?

[Grifter]

Nice times!!

[CaRaZyGuY]

PS... SuperMario isn't going to move this because you guys let him sit at your table.

[spoolin05srt]

PS... SuperMario isn't going to move this because you guys let him sit at your table.



:rofl: :rofl:


Congrats charles!! Nice times. Sure you'll get them down soon enough

[joker_08723]

i ran on slicks 2 times my first was horrible 1.909 60f 12.322 i wasn't in the grove and spun the slicks 1 and 2 gear. my second pass was better i was in the grove but i still spun all of first

[Sota]

Atco was open today?!?

[DAROOKE]

Joker had a pass with a 120mph trap. That was crazy.

[SpinsAll4]

I have jokers time slip where he went 12.50 on slicks and run 120.8 mph.Car is making good power to be running a 120 almost 121. Mike ur car moves jsut have to find that boost leak man. I ran the evo today first time ive ever been to the track with it. First pass i tried launching it at 5 grand and ed, rich and mike can verify that it spun 1st, 2nd, and into 3rd. They actaully said smoke was pouring off the tires. But it went 12.52. but with a 2.12 60ft it will get better.

[HRC20GSRT4]

Was a good time today. Little bit more seat time,tuning, and boost and low 11's should be the norm for the car. The 120.8 trap speed was awesome and the car is making real good power. Just need a little more heat in the track and stop spinning the slicks in second and et's should get much better. Bills evo ran good for an awd car that doesn't hook till 3rd gear.. All an all it was a good start off for the 07 season.. The best is yet to come!!!

Ed

[richierich]

I hate my neon.

[HRC20GSRT4]

I hate my neon.


Love the sig Rich... :rofl: :D

[SpinsAll4]

Rich the sig is classic i think that was amazing and couldnt stop laughing

[PatNy]

what are your mods joker?

[mr_eh]

what are your mods joker?

are you serious? it's in his signature

UNDERPRESSURE RACING
mods list,mopar cai,needs wings v5 w/ e-cutout w/custom split exit,mopar sts w/boogers,s1,msd coil and wires,ngk plugs @ 28,autometer 30/30, hahn super 20g w/portfueler w/30psi wga,act race clutch,qw big fmic,jmb hotside pipe,jmb catch can,dc strut tower bar,prothane master bushings,prothane motor mounts,180 t-stat,hahn bov adapter w/rapter bov,aem wideband uego,dcr oil mod, walboro 255, raceported intake mani, race tb and spacer
-and the next mods to come-bc s2 cams,cam gears,valve train,race porting services to the head, built motor

[joker_08723]

UNDERPRESSURE RACING
mods list,mopar cai,needs wings v5 w/ e-cutout w/custom split exit,mopar sts w/boogers,s1,msd coil and wires,ngk plugs @ 28,autometer 30/30, hahn super 20g w/portfueler w/30psi wga,act race clutch,qw big fmic,jmb hotside pipe,jmb catch can,dc strut tower bar,prothane master bushings,prothane motor mounts,180 t-stat,hahn bov adapter w/hks bov,aem wideband uego,dcr oil mod, walboro 255,extra catchcan for driverside valve cover to intake, lower dogbone motor mount

[joker_08723]

thats whats currently in my car, and soon i will have a fully built dcr motor

[Grifter]

thats whats currently in my car, and soon i will have a fully built dcr motor
Option A, B, stroker?

[joker_08723]

debating, b or stroker. if i go b it will be all ported head 1mm valves, race ported head, crane valve train, crane 16, .20 over pistons head gasket the hole works, w/ a dbb 35r from the man himself. but if i go stroker i will need time to plan what i might want to keep the dam thing driveable..lol

[pettyracing]

Awesome times!!! Sounds like your car is a beast.Let me know when you guys go down again.

[joker_08723]

we sure will, next time i will have race gas, my own slicks and i will be on 30psi

[Grifter]

Good luck.

[joker_08723]

thanks man

[spoolin05srt]

You should buy our slicks....

[joker_08723]

naa i'm buying slicks and rims all at the same time, besides i really need to burn them up to get traction off the line. thanks for the offer though

[spoolinSRT4]

naa i'm buying slicks and rims all at the same time, besides i really need to burn them up to get traction off the line. thanks for the offer though


congrads on the times brotha

[joker_08723]

thanks all for the compliments

[SuperMario]

thanks all for the compliments

Your car sucks. :)

[joker_08723]

^ i know....lol

[joker_08723]

Your car sucks. :)
your just upset because your cutout broke.......:cry:

[SuperMario]

your just upset because your cutout broke.......:cry:


LOL...The odd thing is, I am upset that it broke.

[SuperMario]

PS... SuperMario isn't going to move this because you guys let him sit at your table.

You ASKED me to move your thread, and if it matters, i moved this thread as soon as I saw it.

[richierich]

his car does suck because it is silver:D

[SuperMario]

his car does suck because it is silver:D

I like silver. Just not stage 3 silver.

[richierich]

winged or dewinged:rofl:

[spoolin05srt]

Rich, did you get a chance to run yesterday?

[Honto]

Nice times...

[boostedsohc]

what psi the slicks on?

[richierich]

the psi they should be at:D

[joker_08723]

10 and 11 psi i believe rich, mike bill and ed were my crew chiefs....lol

[hozay09]

Thread is cleaned. Keep the whining, bashing, shit talking in war stories or at Chili's. Thanks.

[spoolin05srt]

Thread is cleaned. Keep the whining, bashing, shit talking in war stories or at Chili's. Thanks.


:nazi:

[joker_08723]

thanks hozay...

[joker_08723]

:rofl: :rofl:
:nazi:

[hozay09]

:nazi:

:nono:

[DrEdSrT4]

nice times joker, car is making some serious power for that turbo.. keep it up

[boostedsohc]

10-11... drop that down to 9.

[joker_08723]

the problem with that is when i get off the throttle the rims almost touch the ground so i think that psi might be too low.....

[SuperMario]

the problem with that is when i get off the throttle the rims almost touch the ground so i think that psi might be too low.....

@ 11 PSI, your rims are touching ground?

[richierich]

i ran my slicks at 11 psi and it perfect for me, so far, with my setup

[Jeffrey7146]

hmmm looks to me like spoolin05srt got pwn3d???

[richierich]

^ how do you mean

[hozay09]

hmmm looks to me like spoolin05srt got pwn3d???


^ how do you mean

:lol: His punishment is almost up. I spoke to him yesterday ;)

[spoolin05srt]

I'MMMM BAAAAAAAAAAACK!!!!!!!!!!!!!!!!! The warden gave me one day solitary confinement for calling....eh....giving him a nazi smilie....But Im out due to good behavior

[joker_08723]

lol, be good.....

[CaRaZyGuY]

i ran my slicks at 11 psi and it perfect for me, so far, with my setup


Yea how'd you do?

[Jeffrey7146]

you looked cute with pink font

[1fastgordo]

congrats bro on the time built or stock motor!!???


-Nick

[HRC20GSRT4]

congrats bro on the time built or stock motor!!???
-Nick


He has a stock motor