Ive had enough~!!!!

[Easy]

i cant stand this mentally retarded mopar bov. its coming off ASAP.

question:
do you guys think i will need gasket maker or something of that nature when bolting back on my stock diverter vavle?

[psi chick]

finally getting rid of the rice plate....good job!!!!

[Rocco]

i finally got rid of mine about 2 months ago...it was fun when that was the only mod i had planned for this car...but finally it had to go

[Kwik-e-nuff]

i still have mine so go pound sand, hahahhaah

[Rocco]

lol

[Wheat_Burner]

i cant stand this mentally retarded mopar bov. its coming off ASAP.

question:
do you guys think i will need gasket maker or something of that nature when bolting back on my stock diverter vavle?

Nope. Nothing needed at all.

[psi chick]

just make sure the surge valve isn't bent from removing it. if it is, just hammer it out.

[Easy]

thanks guys. trust me ive wanted it off since the day i bought the car!! just been too lazy to get that crap off! :dance2:

[ptperformance]

Wait a week and I will have new springs for the stock surge valve that keeps it from blowing off all the time. Should take like 7 to 8 psi before is blows off. I will have directions for this also (very simple).

[Wheat_Burner]

Wait a week and I will have new springs for the stock surge valve that keeps it from blowing off all the time. Should take like 7 to 8 psi before is blows off. I will have directions for this also (very simple).

This would work even if you're running off the pink line?

[Easy]

Wait a week and I will have new springs for the stock surge valve that keeps it from blowing off all the time. Should take like 7 to 8 psi before is blows off. I will have directions for this also (very simple).


well, i'd still like to take the plate out. would this have any benefit from replacing the stock spring with your spring even if theres no plate? if so, i'd like one & more info since i am planning on doing it tomorrow possibly!:D

[ptperformance]

This would work even if you're running off the pink line?
Yes just as if it were the boomba BOV with the 13 adn 19 lb springs. I just want to be a little lower that the boomba because I dont like reverse surge on the compressor wheel. It will help with the constant phhhh phhhh coming from the mopar blue plate at slower speeds.

[ptperformance]

well, i'd still like to take the plate out. would this have any benefit from replacing the stock spring with your spring even if theres no plate? if so, i'd like one & more info since i am planning on doing it tomorrow possibly!:D
None that I could think of.

[SRTpusher]

i have the mopar on my stg 3... i likes it... eet go ppssh1!!!11